The length, width and height are the dimensions of a geometrical figure that depict how long, wide and high a figure is. While length is the longest side of a figure, width is the shorter side and height is the vertical dimension of the figure. Let us learn more about the length width height of figures.
| 1. | What is Length Width Height? |
| 2. | Length vs Width |
| 3. | Length Width Height of a Box |
| 4. | FAQs on Length Width Height |
What is Length Width Height?
Length, width, and height are the tools that are used to find the dimensions of an object. When we refer to two-dimensional shapes (2D shapes), we use the length and width, whereas when we refer to three-dimensional shapes (3D shapes) we use the height along with the length and width. Let us understand the three terms now.
- Length: Length is used to measure the distance between two points. Length is the longest dimension of a figure and it shows how long the given object or figure is. It is expressed in linear units like meters, centimeters, inches, and so on.
- Width: Width is the shorter distance of an object or a figure and it shows how broad or wide the given figure is. Width is also expressed in linear units like meters, centimeters, inches, and so on.
- Height or Depth: The height of an object refers to its depth or the third vertical dimension of the object and it shows how high or deep an object is. The height or depth of an object is expressed in linear units like meters, centimeters, inches, and so on.
It should be noted that length, width, height and depth are words that are derived from the words long, wide, high, and deep, respectively. Hence they express the dimensions of an object. Observe the figure given below to see the length width and height of a cuboid.
Length vs Width
The difference between the length and width of a figure is that length signifies the longer side and width signifies the shorter side of a figure.
The length shows how long the figure is and the width shows how broad or wide it is. The width is also referred to as breadth. For example, if the two sides of a rectangle are given as 8 cm and 3 cm, we can easily identify that the length of the rectangle is 8 cm and the width of the rectangle is 3 cm. Observe the rectangle given below to see the difference between the length and width of a shape.
Length x Width x Height
The length width and height are usually used together to find the volume of a geometrical figure like a rectangular prism which is also known as a cuboid. When we multiply the length, width, and height of a cuboid, we get its volume. This means, Length x Width x Height = Volume of Cuboid. In other words, the capacity or volume of a cuboid or any rectangular box can be measured if we multiply these three dimensions together. Let us understand this with an example.
Example: Find the volume of a cuboid if its length is 8 units, width is 4 units, and height is 3 units.
Solution: The volume of a cuboid can be calculated using the formula,
Volume of Cuboid = Length x Width x Height
After substituting the values we get, Volume of Cuboid = 8 × 4 × 3 = 96 units3
Length Width Height of a Box
The length, width and height of a box can be easily identified because we know that length is the longest side, width is the shorter side and height is the vertical dimension of the box. Observe the figure given below which shows the length, width and height of a box.
These dimensions are always expressed in the order where the length comes first, followed by the width and then the height. This means if the dimensions of a box are to be measured they are expressed in the order of length, width and height. For example, 15'' × 10'' × 3'' means 15'' is the length of the box, 10'' is the width of the box and 3'' is the height of the box.
☛Related Articles
- Measurement
- Length Conversion
- Measuring Length
FAQs on Length Width Height
What is Length Width Height?
Length, width, height, and depth are words that are derived from the adjectives long, wide, high, and deep, respectively. Hence, they express the dimensions of an object. While length shows how long the given object is, the width shows how broad it is and height shows how high it is. All these are expressed in linear units like centimeters, meters, inches, and so on.
What is the Formula for Length Width and Height?
When the length, width, and height of a cuboid are multiplied together, it gives the volume of the cuboid. The formula for the volume of a cuboid is, Volume of Cuboid = Length × Width × Height.
What is the Difference Between Length Width Height?
The length, width, height of an object are the different dimensions expressed in linear units. While length is the longest side of a shape, width is the shorter side, and height is the vertical dimension or depth of the shape.
What is the Order of Length Width Height?
When the dimensions of a geometrical figure are written, they are written in the order in which the length comes first, followed by the width and then the height. For example, if the dimensions of a cuboid are to be expressed, it will be written as Length × Width × Height, that is, 7 × 4 × 3, where 7 represents the length, 4 represents the width and 3 represents the height of the cuboid.
How to Calculate Cubic meter from Length Width Height?
Cubic meter is the unit that expresses the volume of a cuboid. Therefore, in order to find the volume of a cuboid in cubic meters the length, width and height are multiplied together. It should be noted that all the length, width and height should have the same units (meters) so that the volume is expressed in cubic meters. For example, if the length of a cuboid is 10 m, its width is 6 m and height is 3 m, let us find its volume in cubic meters. Volume of a cuboid = length × width × height. After substituting the values, we get, Volume of a cuboid = 10 × 6 × 3 = 180 cubic meters.
What is the Length Breadth and Height of a Cuboid?
The length of a cuboid is the longest side when the cuboid is placed horizontally. The width is the shorter side of the cuboid. The height is the vertical dimension of the cuboid.
How to Find the Length Width and Height when Volume is Given?
The formula that is used to find the volume of a cuboid is, Volume of Cuboid = Length × Width × Height. Therefore, if any one dimension is missing, it can be calculated by using this formula by substituting the other given values. For example, let us find the height of a cuboid if the volume of a cuboid is given as 144 cubic cm, the length = 12 cm, width = 2 cm. Since the height of the cuboid is not known, let us substitute the rest of the dimensions in the formula. Volume of Cuboid = Length × Width × Height. After substituting the known values we get, 144 = 12 × 2 × Height. After solving this we get the height as, 6 cm.
FAQs
Times the width times the height but again like I said they're all the same so you can technically
What is length width and height example? ›
This means if the dimensions of a box are to be measured they are expressed in the order of length, width and height. For example, 15'' × 10'' × 3'' means 15'' is the length of the box, 10'' is the width of the box and 3'' is the height of the box.
What is L * W * H? ›
Length, width, height, depth.
What comes first width or height? ›
The Graphics' industry standard is width by height (width x height). Meaning that when you write your measurements, you write them from your point of view, beginning with the width. That's important.
How do you calculate length? ›
If you have the area A and width w , its length w is determined as h = A/w . If you have the perimeter P and width w , its length can be found with h = P/2−w . If you have the diagonal d and width w , it's length is h = √(d²−w²) .
Which one is length and width? ›
1. Length is describing how long something is while width is describing how wide an object is. 2.In geometry, length pertains to the longest side of the rectangle while width is the shorter side. 3.
How do you find the width? ›
If you have the area A and length h , its width w is w = A/h . If you have the perimeter P and length h , its width is w = P/2−h . If you have the diagonal d and length h , it's width can be found with w = √(d²−h²) .
How do you calculate length width height and square feet? ›
To calculate the square footage of any area, all you need to do is multiply the length and the width of the area (how tall x how wide).
How do you find the length width and height of a box? ›
To get started, look at the top opening of the box to measure the following dimensions; Length: The longest side when looking at the top of the box. Width: The shorter side when looking at the top of the box. Depth (Height): The side perpendicular to the length and width.
What does 8 mean in length? ›
How to Measure in Eighths on a Ruler : Math Measurements - YouTube
The volume formula of the cuboid is l × b × h cubic units. Here "l", "b", and "h" denote the length, breadth, and height of the cuboid.
What is D in measuring? ›
Updated: 04/30/2020 by Computer Hope. Commonly abbreviated as D, depth is a measurement of how far back a three-dimensional object is. For example, measurements of an object, such as a computer monitor, are commonly measured as (D x W x H), short for Depth by Width by Height.
When dimensions are listed what is the order? ›
The dimensions displayed in the size tab are listed as length x width x height.
What comes first length or width for pants? ›
What does pant size 32×32 mean? The first number is waist size in inches, the second leg length or inseam. So a 32 waist x 32 length is equivalent to M or medium. See our pant size chart for more info.
How do you find length with height width and volume? ›
Volume (LxWxH) - YouTube
What is a length in math? ›
Length is defined as the measurement or extent of something from end to end. In other words, it is the larger of the two or the highest of three dimensions of geometrical shapes or objects. For example, a rectangle has its dimensions as length and breadth.
How can I calculate my height? ›
Lightly mark the wall with a pencil at the point where the ruler or book (or other flat object) meets your head. Use a tape measure — ideally a metal one that will remain straight — to measure the distance from the floor to the mark on the wall.
How do you find length and width from area? ›
Using equations to find the length or width of a rectangle ... - YouTube
What is an example of width? ›
The distance from side to side. Example: the width of this door is 80 cm.
What is a width in math? ›
The distance (length) from side to side.
No there is no rule for the length to be greater than the width. It depends on you about which magnitude you consider as the length or the width. Although we usually take the length as the greater one.
What is the width of the area? ›
Divide the area by the length if you are given these two figures but not the width. For example, if a rectangle has an area of 20 square feet and a length of 10 feet, divide 20 by 10 to get a width of 2 feet. Multiply the length times 2 and subtract this figure from the perimeter, if you're given these values.
What is the formula for area? ›
Area and Perimeter Formula Chart
| Figures | Area Formula | Variables |
|---|
| Area of Square | Area = a2 | a = sides of the square |
| Area of a Triangle | Area = 1/2 b×h | b = base h = height |
| Area of a Circle | Area = πr2 | r = radius of the circle |
| Area of a Trapezoid | Area = 1/2 (a + b)h | a =base 1 b = base 2 h = vertical height |
2 more rows30 Sept 2020
The term height refers to how tall is an object. whereas length refers to how long is the object. Sometimes, there is confusion between the terms such as length and width. Length pertains to the longest side of the shape, and the width describes the wilderness of the object, which is the shorter side of the object.
How do you calculate height from foot length? ›
In the mid 1800s, Topinard proposed a simple formula for estimating a person's height: maximum foot length divided by 0.15 reveals the stature of most individuals.
How many square feet is a 12x12 room? ›
How many square feet is a 12x12 room? The square footage of a room 12 feet wide by 12 feet long is 144 square feet. Find the square footage by multiplying the width (12 ft) by the length (12 ft).
What order is length width height? ›
Measurements always go in the following order: length x width x height. For example, if a product is 12" x 6" x 8", it is 12 inches long, 6 inches wide, and 8 inches tall. If there is a fourth number, that is for the depth or thickness of the item.
How do you measure length width and depth? ›
Height, Length/Width, and Depth dimensions on blueprints - YouTube
How do you calculate area of a box? ›
To find the surface area of a cuboid, add the areas of all 6 faces. We can also label the length (l), width (w), and height (h) of the prism and use the formula, SA=2lw+2lh+2hw, to find the surface area.
What is a 16 in size? ›
There are two popular ways of writing feet: the abbreviation “ft.” or the single apostrophe (′). Inches can be represented using “in.” or with a double apostrophe (″). As an example, five feet, ten inches could be written as 5 ft. 10 in or 5′10″.
Is it 12 inches or feet? ›
One foot is equal to 12 inches. A foot (abbreviation ''ft'') is a unit of length in the United States customary and imperial measurement systems. The international agreement defined both units as equivalent to 12 inches, and in both systems, a foot is equal to 12 inches, and a yard is made up of 3ft.
What is the formula of all shapes? ›
Area of 3D Shapes Formula
| Shape | Surface area | Terms |
|---|
| Rectangular prism | 2(wl+hl+hw) | l = length w = width h = height |
| Cylinder | 2πr(r + h) | r = radius of circular base h = height of the cylinder |
| Cone | πr(r + l) | r = radius of circular base l = slant height |
| Sphere | 4πr2 | r = radius of sphere |
2 more rowsClass 6 to 12 Formulas.
...
List of Maths Formulas (for All Concepts)
| 2cosacosb Formula | 30-60-90 Formulas |
|---|
| Inverse Matrix Formula | Inverse Tangent Formula |
| Inverse Trigonometric Formulas | Inverse Variation Formula |
| Isosceles Trapezoid Formula | Isosceles Triangle Perimeter Formula |
| Lagrange Interpolation Formula | Lateral Area Formula |
150 more rowsVolume is a three-dimensional quantity that is used to measure the capacity of a solid shape. It means the amount of three-dimensional space a closed figure can occupy is measured by its volume.
What is L and W and H? ›
VOLUME OF A BOX, CUBE, OR CYLINDER V l w = h where l = the length w = the width, and h = the height of the figure 13 6 8 V = 6. Page 1. VOLUME OF A BOX, CUBE, OR CYLINDER. The concept of volume holds great practical importance.
Is D the length? ›
The measurements of depth (D), length (L), width (W) and height (H) at...
How do you read a table size? ›
Length: The longest side of the table, starting at one edge and ending at its opposite edge. Width: The shorter side of the table, starting at one edge and ending at its opposite side. Height: Starting from the floor and ending at the top of the table.
How dimensions are written? ›
All box dimensions are written as length x width x height. For example, 14" x 11" x 4" means 14" (L) x 11" (W) x 4" (H)".
What comes first in 3 dimensions? ›
All dimensions are listed as length x width x height.
How do you find the dimensions of a rectangle? To find the dimensions of a rectangle: Rewrite the perimeter equation P = 2(a+b) in terms of one of the dimensions, like so: b = P/2−a .
What does pant size 32x32 mean? ›
32×32 means 32 inches at the waist and 32 inches length of jeans (inseam).
What size is a 32 waist? ›
For example: If you have a 32 inch waist, your size is a US-Size M or Euro-Size 42. US Size / Internat.
What does 34x32 mean in pants? ›
Take the second number to identify the length of the pants from the inseam, or the top of the crotch area, to the bottom of the pants leg. For instance, if the label has a pants size of "26x32," then the pants have a waist circumference of 26 inches (66 cm) and a leg length of 32 inches (81 cm).
What is the formula for volume? ›
The volume of an object is the amount of space occupied by the object or shape, which is in three-dimensional space.
...
Volume Formulas of Various Geometric Figures.
| Shapes | Volume Formula | Variables |
|---|
| Rectangular Solid or Cuboid | V = l × w × h | l = Length w = Width h = Height |
9 more rows12 Oct 2020
To find the volume of a box, simply multiply length, width, and height — and you're good to go! For example, if a box is 5×7×2 cm, then the volume of a box is 70 cubic centimeters.
How do you find the length width and height of a rectangular prism with the volume? ›
Rectangular Prism - Volume, Surface Area and Diagonal Length ...
How do you find length width height and surface area? ›
Find the length of a cube given surface area - YouTube
How do you find the length and width if you know the area? ›
Using equations to find the length or width of a rectangle ... - YouTube
How do you find the height of a rectangle if you know the length and width? ›
Ex: Find the Height of a Rectangle Given the Area - YouTube
Area and Perimeter Formula Chart
| Figures | Area Formula | Variables |
|---|
| Area of Square | Area = a2 | a = sides of the square |
| Area of a Triangle | Area = 1/2 b×h | b = base h = height |
| Area of a Circle | Area = πr2 | r = radius of the circle |
| Area of a Trapezoid | Area = 1/2 (a + b)h | a =base 1 b = base 2 h = vertical height |
2 more rows30 Sept 2020
1 Answer
- V=l×h×w , where V= Volume, l= length, h= height, and w= width.
- 11,232=13×36×w.
- 11,232=468×w.
- Divide both sides by 468 .
- 11,232468=w.
- 24=w.
- Hence, the width is 24 feet.
Rectangular Prism - Volume, Surface Area and Diagonal Length ...
How do you find the length of a breadth and height when given the volume? ›
Volume (LxWxH) - YouTube
How do you calculate length width height and square feet? ›
To calculate the square footage of any area, all you need to do is multiply the length and the width of the area (how tall x how wide).
How do you find the length and width given the area and perimeter? ›
Find length and width when area and perimeter of rectangle is ... - YouTube
What is the width of the area? ›
Divide the area by the length if you are given these two figures but not the width. For example, if a rectangle has an area of 20 square feet and a length of 10 feet, divide 20 by 10 to get a width of 2 feet. Multiply the length times 2 and subtract this figure from the perimeter, if you're given these values.
What is the formula of height? ›
so h = 2 * area / b.
What is the formula for finding height? ›
Plug your values into the equation A=1/2bh and do the math. First multiply the base (b) by 1/2, then divide the area (A) by the product. The resulting value will be the height of your triangle!
How can I calculate my height? ›
Lightly mark the wall with a pencil at the point where the ruler or book (or other flat object) meets your head. Use a tape measure — ideally a metal one that will remain straight — to measure the distance from the floor to the mark on the wall.
Area of 3D Shapes Formula
| Shape | Surface area | Terms |
|---|
| Rectangular prism | 2(wl+hl+hw) | l = length w = width h = height |
| Cylinder | 2πr(r + h) | r = radius of circular base h = height of the cylinder |
| Cone | πr(r + l) | r = radius of circular base l = slant height |
| Sphere | 4πr2 | r = radius of sphere |
2 more rowsArea of a Rectangle. A = l × b. The area of any rectangle is calculated, once its length and width are known. By multiplying length and breadth, the rectangle's area will obtain in a square-unit dimension.
How do you calculate shapes? ›
How to calculate area?
- Square area formula: A = a²
- Rectangle area formula: A = a × b.
- Triangle area formulas: A = b × h / 2 or. ...
- Circle area formula: A = πr²
- Circle sector area formula: A = r² × angle / 2.
- Ellipse area formula: A = a × b × π
- Trapezoid area formula: A = (a + b) × h / 2.
- Parallelogram area formulas:
